ShoreTel ShoreWare Especificaciones descargar pdf (Pagina 163)

Setting Call Control Options

ShoreTel 6.1 Administration Guide 9 – 15

FAX and Modem Calls This drop-down list lets you select the type of encoding

used for faxing or when calls are made from a modem.

Choose one of these encodings:

• Linear (128 Kbps)

• G.711 (64 Kbps)—the default

Maximum Inter-Site Jitter Buffer—This parameter sets the

maximum size of the jitter buffer. A larger jitter buffer might

result in more delay between calling parties, which might

degrade the quality of service. The buffer can be set from 20

to 300 msec. The default is 50 msec.

DiffServ/TOS Byte Enter a Types of Service (TOS) value or a DiffServ value,

whichever your network currently supports. This byte is

applied to media originating from all ShoreGear physical

switches (SoftSwitches excluded) and IP phones. The value

entered in this field must be a decimal number 0 to 255.

Admission control

algorithm assumes RTP

header compression is

being used

To enable this feature, select the check box.

Enable Media

Encryption

To enable this feature, select the check box. Note that

encryption occurs at the application layer and that only calls

inside a ShoreTel network will be encrypted. Once the call

passes through TDM filtering the encryption is stripped

away and the conversation is no longer encrypted.

Always Use Port 5004

for RTP

By default, this box is checked. You should clear this check

box to enable interoperability with third-party SIP devices.

Note: All IP Phones and switches must be rebooted for

settings to take effect. Failure to reboot may result in one

way media.

Trunk-to-Trunk Transfer and Tandem Trunks

1 2 ... 158 159 160 161 162 163 164 165 166 167 168 ... 405 406

Sin comentarios

ShoreTel ShoreWare Especificaciones Pagina 163